Masonry Waterproofing and Coatings in Collierville, TN

We provide masonry waterproofing in Collierville, TN for brick, block, and stone walls that struggle with leaks and staining. Using breathable sealers, elastomeric coatings, and targeted repairs, we help your building envelope shed water while allowing moisture vapor to escape, reducing damage over time.

Superior Masonry Collierville provides professional masonry waterproofing throughout Collierville, TN, Tennessee and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call (901) 582-7374 or request your free quote.

Protecting Collierville Masonry From Water Damage

In Collierville, our weather puts brick, block, and stone to the test. Hot, humid summers, sudden downpours, and the occasional hard freeze all push moisture into your masonry. If that moisture cannot get back out the right way, you start seeing white powder on the surface, dark stains, hairline cracks, and eventually loose bricks or spalling faces.

Superior Masonry Collierville focuses on masonry waterproofing that respects how brick and mortar actually work. Most homes here in Collierville, Piperton, and East Memphis suburbs are a mix of 1990s and 2000s brick veneer builds, older 1960s ranch homes, and newer commercial centers with split-face block. Each of these wall types behaves differently with water, so we do not use a one-coating-fits-all approach.

Our goal is not to “seal your wall like plastic.” That can trap moisture inside and cause worse problems. Instead, we use breathable products that reduce water absorption from rain while still letting interior moisture escape. This keeps your walls drier, improves energy efficiency, and helps prevent costly structural repairs down the road.

Whether you are dealing with a leaky chimney in Collierville’s historic district, a damp garage wall near Bailey Station, or dark, wet bricks on the shady side of a Lakeland or Germantown property, our team tailors waterproofing to your specific structure and site conditions.

How Our Masonry Waterproofing Process Works

When Superior Masonry Collierville handles masonry waterproofing, we follow a clear step-by-step process so you know exactly what is happening to your home or building.

1. Inspection and moisture diagnosis We start with a close visual inspection and, if needed, moisture meter readings. We look for cracks, missing mortar, soft or crumbling joints, efflorescence (the white, chalky residue), mold or mildew at the base of walls, and any signs of water coming through to the interior. We also look at grading, downspouts, weep holes, and flashing, because many “masonry problems” actually start with drainage.

2. Surface cleaning and preparation Waterproof coatings will not bond properly to a dirty or chalky surface. We usually wash the masonry with a low to medium pressure rinse, combined with masonry-safe cleaners that remove mildew, dirt, and efflorescence without scarring the brick. For Collierville’s red brick veneers, we choose cleaners that will not bleach or etch the surface, and we protect landscaping while we work.

3. Repairs before coating We always repair damage before applying any waterproofing. This may include tuckpointing missing or cracked mortar joints, replacing loose or spalled bricks, sealing small non-structural cracks, or addressing gaps around windows, doors, and utility penetrations. On chimneys, we also inspect crowns and flashing, since failed metal or concrete at the top will defeat any wall coating.

4. Selecting the right waterproofing product Different materials need different products. For most brick and stone, we recommend high quality silane or siloxane penetrating sealers that soak into the material and chemically bond with it. These are virtually invisible, keep the original look of the brick, and allow vapor to escape. For more porous concrete block, especially split-face block used on commercial centers along Poplar Avenue, we may combine a penetrating treatment with a breathable elastomeric coating to handle wind-driven rain.

5. Application and quality checks We apply our waterproofing products using professional sprayers or rollers, depending on the surface profile and location. We control mil thickness carefully on pigmented coatings so you get the protection you are paying for. On penetrating sealers, we watch for uniform absorption and may apply a second “wet on wet” coat where the masonry is very porous. After application, we spot test water repellency to confirm that the treatment is working as intended.

6. Cleanup and homeowner walk-through We leave the site tidy, remove masking and coverings, and walk you around your property to show exactly what was done. We also explain expected drying times, appearance changes if any, and how to maintain the newly treated surfaces.

Types of Masonry Waterproofing and Coatings We Offer

Superior Masonry Collierville offers several options so we can match the right masonry waterproofing solution to your property, budget, and long-term plans.

Penetrating water repellents These are our first choice for most residential brick and natural stone. Silane and siloxane products soak below the surface, bond with the pores of the masonry, and dramatically reduce water absorption while keeping the surface breathable. They do not create a shiny film and usually leave the color unchanged, which is ideal for keeping that classic Collierville brick look.

Clear breathable coatings In some cases, especially on older or softer brick where the face has begun to wear, we use clear, breathable film-forming coatings. These add a very thin protective skin that helps protect against wind-driven rain and pollutants. We select products that are UV stable so they will not yellow in the strong Tennessee sun.

Elastomeric wall coatings For commercial buildings with concrete block or stucco, or for heavily weathered masonry that has frequent hairline cracking, we may recommend elastomeric coatings. These create a thicker, flexible layer that can stretch slightly and bridge small cracks. They also provide a uniform appearance, which is useful if your building has had multiple patches or additions over the years.

Chimney and parapet waterproofing Chimneys and parapet walls are particularly vulnerable because they are fully exposed on all sides. We combine penetrating sealers on the vertical surfaces with specialized crown coatings or cap repairs on the top. For older chimneys around the Town Square, this combination often stops leaks that have stained ceilings or damaged fireplaces inside.

Below grade and foundation-related treatments While true below-grade waterproofing is usually done during construction, we can help with above-grade foundation walls, exposed block in walk-out basements, and moisture issues on the first few courses of brick. In these cases, we may pair coatings with drainage improvements like regrading, splash blocks for downspouts, and repair of compromised weep holes.

What Affects Cost and How We Help You Save

Homeowners in Collierville often ask why masonry waterproofing prices can vary so much. There are several real factors that affect the cost, and understanding them helps you compare quotes fairly.

Size and height of the project A single-story brick veneer on a ranch home off Shelby Drive is quicker and safer to access than a three-story gable with multiple chimneys. Taller structures require more staging, fall protection, and setup time. We price accordingly, and we always explain how access impacts your estimate.

Condition of the masonry If your brick and mortar are in good shape, we may only need cleaning and waterproofing. If we find cracked joints, missing bricks, or deteriorated chimney crowns, those repairs add cost but they are essential. Applying a coating over failing masonry is a waste of your money. Superior Masonry Collierville separates repair items on the estimate so you can see clearly what each part costs.

Type of product and number of coats Premium silane or siloxane sealers that last 8 to 12 years cost more than basic hardware store sealers that may last only 2 or 3. Elastomeric coatings also require more material and labor per square foot than penetrating sealers. We will show you the pros and cons of each option so you can decide if a longer service life is worth the higher up-front cost.

Access and preparation needs Overgrown shrubs against the house, tight property lines, or areas above decks and sunrooms can demand more careful setup and protection. In some Collierville neighborhoods, we coordinate with HOA guidelines for working hours and appearance. Any special access challenges are noted in the quote so there are no surprises.

Scheduling work together to reduce costs If you are already planning tuckpointing, brick repairs, or chimney work, it is usually more economical to schedule waterproofing at the same time. We are already set up on site, which reduces labor and mobilization costs. Many customers choose to bundle these services for that reason.

Local Considerations Before You Waterproof Your Masonry

Before you hire anyone for masonry waterproofing in Collierville, it helps to understand a few local factors that affect how the job should be done.

Climate and freeze-thaw cycles Our winters are not as harsh as up north, but we still get enough freezing nights that water trapped in brick can expand and cause spalling. That is why breathable systems are so important here. Non-breathable, glossy “sealants” can hold water inside the wall, and when the next freeze hits, the outer face of the brick can pop off.

Typical local construction details Most homes in Collierville use brick veneer over a wood-framed wall, with an air gap and weep holes at the bottom. Those weep holes are not “defects” and should never be sealed over. They are designed to let moisture and vapor escape. When Superior Masonry Collierville waterproofs a veneer wall, we protect and preserve weep holes so your wall can keep working as intended.

Waterproofing is not a cure-all If your problem is actually a roof leak, leaking gutters, or a negative slope that sends water toward your foundation, coatings alone will not fix it. During our inspection, we will point out any related issues we see, such as failing gutter joints over your brick, splashback from sidewalks, or poor grading, and recommend practical fixes.

Appearance and maintenance Most of the products we use are clear and will not noticeably change the color of your brick or stone. If you choose a pigmented coating for block or stucco, we will show you sample colors and expected finishes. We also explain maintenance, such as gentle cleaning methods and how often to reapply products in our local climate.

Choosing a qualified contractor Finally, ask any contractor what specific products they plan to use on your Collierville home, whether those products are vapor permeable, and how long they are expected to last. Superior Masonry Collierville documents product names, data sheets, and coverage rates in our proposals so you know exactly what is going onto your walls and why.